WELD CAP
HIS weld fittings conform to ASTM A-269 and ASME standards, with qualified ASME welders and procedures to provide the best weld. Fittings are made of 304 stainless steel, but 316/316L is available upon request.
FINISH
Standard finish for fittings is Mill Finish. #7 polish OD/ID available upon request.
Measurements are listed in inches (mm).
Part No. | Tube O.D. | A | Wall |
---|---|---|---|
WF-08-08WC304M | 0.50 (12.7) | 0.28 (7.1) | 0.049 (1.2) |
WF-12-12WC304M | 0.75 (19.1) | 0.31 (8) | 0.065 (1.7) |
WF-16-16WC304M | 1.00 (25.4) | 0.47 (11.9) | 0.065 (1.7) |
WF-18-18WC304M | 1.50 (38.1) | 0.59 (15.1) | 0.065 (1.7) |
WF-20-20WC304M | 2.00 (50.8) | 0.78 (19.8) | 0.065 (1.7) |
WF-25-25WC304M | 2.50 (63.5) | 1.06 (27) | 0.065 (1.7) |
WF-30-30WC304M | 3.00 (76.2) | 1.09 (27.8) | 0.065 (1.7) |
WF-40-40WC304M | 4.00 (101.6) | 1.28 (32.5) | 0.065 (1.7) |
WF-60-60WC304M | 6.00 (152.4) | 2.13 (54) | 0.065 (1.7) |
WF-80-80WC304M | 8.00 (203.2) | 2.61 (66.3) | 0.083 (2.1) |
WF-100-100WC304M | 10.00 (254) | 3.14 (79.8) | 0.083 (2.1) |
WF-120-120WC304M | 12.00 (304.8) | 3.78 (96) | 0.083 (2.1) |