WF 45° elbow with tangents, TYPE 2
HIS weld fittings conform to ASTM A-269 and ASME standards, with qualified ASME welders and procedures to provide the best weld. Fittings are made of 304 stainless steel, but 316/316L is available upon request.
FINISH
Standard finish for fittings is Mill Finish; other finishes available upon request. Add number/letter to the end of the part number to specify the finish. M = Mill finish, 7 = #7 polish OD/ID.
Measurements are listed in inches (mm).
| Part No. | Tube Size | A | Wall |
|---|---|---|---|
| WF-08-45EL304T2M | 0.50 (12.7) | 2.25 (57.2) | 0.049 (1.2) |
| WF-12-45EL304T2M | 0.75 (19.1) | 2.25 (57.2) | 0.065 (1.7) |
| WF-16-45EL304T2M | 1.00 (25.4) | 1.19 (30.2) | 0.065 (1.7) |
| WF-18-45EL304T2M | 1.50 (38.1) | 1.63 (41.3) | 0.065 (1.7) |
| WF-20-45EL304T2M | 2.00 (50.8) | 2.31 (58.7) | 0.065 (1.7) |
| WF-25-45EL304T2M | 2.50 (63.5) | 3.00 (76.2) | 0.065 (1.7) |
| WF-30-45EL304T2M | 3.00 (76.2) | 3.69 (93.7) | 0.065 (1.7) |
| WF-40-45EL304T2M | 4.00 (101.6) | 4.81 (122.2) | 0.083 (2.1) |
| WF-60-45EL304T2M | 6.00 (152.4) | 6.25 (158.8) | 0.083 (2.1) |