WF 4-way reducing Cross
HIS weld fittings conform to ASTM A-269 and ASME standards, with qualified ASME welders and procedures to provide the best weld. Fittings are made of 304 stainless steel, but 316/316L is available upon request.
FINISH
Standard finish for fittings is Mill Finish; other finishes available upon request. Add number/letter to the end of the part number to specify the finish. M = Mill finish, 7 = #7 polish OD/ID.
Measurements are listed in inches (mm).
| Part No. | Tube O.D. | A | B |
|---|---|---|---|
| WF-16-12CS304T1M | 1.00 (25.4) X 0.75 (19.1) | 1.88 (47.8) | 1.12 (28.4) |
| WF-18-12CS304T1M | 1.50 (38.1) X 0.75 (19.1) | 2.25 (57.2) | 1.38 (35.1) |
| WF-18-16CS304T1M | 1.50 (38.1) X 1.00 (25.4) | 2.25 (57.2) | 2.13 (54.1) |
| WF-20-12CS304T1M | 2.00 (50.8) X 0.75 (19.1) | 3.00 (76.2) | 1.63 (41.4) |
| WF-20-18CS304T1M | 2.00 (50.8) X 1.50 (38.1) | 3.00 (76.2) | 2.50 (63.5) |
| WF-25-18CS304T1M | 2.50 (63.5) X 1.50 (38.1) | 3.00 (76.2) | 2.75 (69.9) |
| WF-25-20CS304T1M | 2.50 (63.5) X 2.00 (50.8) | 3.00 (76.2) | 3.25 (82.6) |
| WF-30-18CS304T1M | 3.00 (76.2) X 1.50 (38.1) | 3.25 (82.6) | 3.00 (76.2) |
| WF-40-18CS304T1M | 4.00 (101.6) X 1.50 (38.1) | 3.88 (98.6) | 3.50 (88.9) |
| WF-40-20CS304T1M | 4.00 (101.6) X 2.00 (50.8) | 3.88 (98.6) | 4.00 (101.6) |
| WF-40-25CS304T1M | 4.00 (101.6) X 2.50 (63.5) | 3.88 (98.6) | 3.75 (95.3) |
| WF-40-30CS304T1M | 4.00 (101.6) X 3.00 (76.2) | 3.88 (98.6) | 3.75 (95.3) |
| WF-60-18CS304T1M | 6.00 (152.4) X 1.50 (38.1) | 5.00 (127) | 4.50 (114.3) |
| WF-60-20CS304T1M | 6.00 (152.4) X 2.00 (50.8) | 5.00 (127) | 5.00 (127) |
| WF-60-25CS304T1M | 6.00 (152.4) X 2.50 (63.5) | 5.00 (127) | 4.75 (120.7) |
| WF-60-30CS304T1M | 6.00 (152.4) X 3.00 (76.2) | 5.00 (127) | 4.75 (120.7) |
| WF-60-40CS304T1M | 6.00 (152.4) X 4.00 (101.6) | 5.00 (127) | 4.88 (124) |